Singurul modul din lume pentru controlul motoarelor pe curent continuu


Modulul Qubino Flush Shutter DC este ideal pentru controlul motoarelor pe curent continuu 12-24V ce actioneaza jaluzele, rulouri sau porti. Acesta se poate controla de la distamta, prin intermediul unei retele Z-Wave sau local cu ajutorul unui comutator de perete. Modulul masoara de asemenea si consumul de energie, permitand totodata si conectarea unui senzor de temperatura digital.


What is it used for?

The Qubino Flush Shutter DC is ideal for remotely controlling the 12–24V DC motors of blinds, rollers, shades, venetian blinds and similar sunscreens.


 The smallest of them all.

The Qubino Flush Shutter DC module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy wizard.

The Qubino Flush Shutter DC can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.3 W.

Remarkably versatile.

The Qubino Flush Shutter DC can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

Incredibly fast support. Free.

We know that when you need information you need it quickly. That is why we offer a live customer service helpline, where you can get instant answers to all your questions. Free. All our support and training is personalized and free of charge.

The most tested and most reliable module.

Qubino modules are „install-and-forget” products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Technical specifications

Electrical diagram 12 – 24VDC

Power supply 12 – 24 VDC ±10%
Rated load current 2 A
Overcorrect protection 5 A
Output circuit power of DC output (resistive load) 48 W (24 VDC)
Power measurement accuracy +/- 5%
Digital temperature sensor range
(sensor must be ordered separately)
-50° ~ +125°C
Operation temperature -10° ~ +40°C
Distance up to 30 m indoors
(depending on building materials)
Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm
(packaging) (79 x 52 x 22)
Weight (including packaging) 28 g (34 g)
Electricity consumption 0.3 W
For installation in boxes Ø ≥ 60 mm or 2 M
Switching H bridge

Supported Z-Wave Frequencies

ZMNHOD1 868.42 MHz
ZMNHOD2 921.42 MHz
ZMNHOD3 908.42 MHz
ZMNHOD8 865.2 MHz

Additional parameters for pros
Additional parameters for pros.
There are 14 additional parameters for expert users. Some of the most useful are:

  • Activate/deactivate functions ALL ON / ALL OFF
  • Define selection between two available operating modes
  • Define time necessary for slats to make full turn (180 degrees)

See the setting parameters

What do you get?

Practical blister packaging ensures lower cost of delivery.
The package contains 1 module and 1 user manual.

Package dimensions (WxHxD): 79 x 52 x 22 mm
Gross weight (including packaging): 34 g